Keep your classic Farberware brewing strong with these essential replacement components. Whether you inherited that vintage pot or bought it new decades ago, you know theres nothing quite like its rich percolated coffee. But over time, seals wear out and baskets get bent. That’s where finding the right farberware coffee percolator parts comes in. You don’t need to buy a whole new unit — just swap out what’s tired and your machine will perk like it’s brand new again.
You love how simple these pots are. No fancy electronics, just good old-fashioned boiling water and grounds. But even the best stainless steel needs a little TLC. Replacing a worn gasket or a cracked glass knob keeps your morning ritual going strong. It’s easy to do and way cheaper than replacing the whole percolator. So grab your parts and get that coffee brewing just the way you like it.
Product Comparison Table: 9 Best Farberware Coffee Percolator Parts
| Image | Why We Like This Product | Editor’s Rating | |
 |
Lounsweer 2 Sets Percolator Parts Top and Washer Ring…
|
9.6 |
Read Review |
 |
GEAIN Percolators Pump Tube Spring Fits For Farberware Yosemite…
|
9.4 |
Read Review |
 |
Coffee Percolator Plastic Knob Top and Washer Rings Compatible…
|
9.2 |
Read Review |
 |
Univen Plastic Knob Top and Washer Ring Compatible with…
|
9.1 |
Read Review |
 |
Kscjdg Percolator Coffee Maker Pump Tube Fits Farber-ware 4…
|
8.9 |
Read Review |
 |
Percolator Pump Tube Springs for Farberware Yosemite Coffee Maker,…
|
8.7 |
Read Review |
 |
Univen Percolator Coffee Maker Pump Tube fits Farberware 8…
|
8.5 |
Read Review |
 |
BKIFU P04-303 Coffee Percolators Thermostat Replacement Parts Fits for…
|
8.4 |
Read Review |
 |
Univen Coffee Percolator Basket Compatible with Farberware 8 Cup…
|
8.2 |
Read Review |
Quick Review For Top 9 Farberware Coffee Percolator Parts
Lounsweer 2 Sets Percolator Parts Top and Washer Ring Compatible with Farberware Yosemite Coffee Percolators Replacement Transparent Coffee Pot Filters
The Lounsweer 2 Sets Percolator Parts Top and Washer Ring is a practical replacement kit for anyone using a Farberware Yosemite coffee percolator. This set gives you two tops and two plastic washer rings. That means you have enough for your current needs plus a spare for when you inevitably need a swap. It is a simple, no-fuss solution to keep your percolator working like new.
Size is important here. Each coffee filter top is about 1.5 inches tall and 0.85 inches in diameter.
It is designed to fit percolators with a 0.86 inch (22 mm) hole in the lid. That specific measurement matches the Farberware Yosemite models. You should check your own lid opening before ordering to make sure it lines up. A quick measurement saves you the trouble of getting something that doesn’t quite fit.
The materials are chosen for daily use. The percolator knob is made from tempered plastic. It is reliable, safe, and feels smooth to the touch. It won’t deform or corrode easily.
It is also heat resistant and dishwasher safe, so cleaning is simple. You can reuse these parts for a long time without worry. One thing to note: the screw thread might have a slight defect or mold line. This is normal for this type of part. It does not affect how it works or how it looks. It is just a small quirk of the manufacturing process.
Design wise, these tops are transparent and clear. The look is simple and classical.
GEAIN Percolators Pump Tube Spring Fits For Farberware Yosemite Stove Top Coffee Percolators – 2 Pcs
The GEAIN Percolators Pump Tube Spring set of 2 is a replacement part made to fit Farberware Yosemite stove top coffee percolators. These springs are designed specifically for the 8 or 12 cup models from that line, so if you have a different brand or style, they probably won’t work. The main job of this spring is to keep your percolators pump tube working right.
It holds the powder basket firmly in place during the brewing process, which is important for getting a consistent cup of coffee.
Each spring measures about 0.4 inches in diameter at the small end inner ring, 0.8 inches at the big end, and stands roughly 1.25 inches high. That size is a direct match for the pump tube in your Yosemite percolator. The spring itself is made with a substantial thickness, so it has a strong rebound force.
That means it won’t easily lose its shape or go flat over time. It is also corrosion-resistant, which helps prevent rusting, oxidation, and scratches on the metal parts it touches. This should make it last longer than some thinner, cheaper springs you might find.
If your old spring is worn out or missing, your coffee basket might not sit stable, leading to uneven brewing or grounds getting into your cup. This set gives you two springs, so you have a spare or can replace both if needed.
Coffee Percolator Plastic Knob Top and Washer Rings Compatible with Farberware Yosemite Coffee Percolators, Fit for Farberware Coffee Maker Replacement Parts,Transparent Coffee Percolator Top 2 Sets
The Coffee Percolator Plastic Knob Top and Washer Rings Compatible with Farberware Yosemite Coffee Percolators is a practical replacement set for your stovetop brewer. This product is made for Farberware Yosemite models that have a 0.86-inch (22mm) hole in the lid, including the 50124 and 47053 in both 8-cup and 12-cup sizes. If your old knob top is cracked, worn, or just not sealing well, this set offers a simple fix.
You get two complete sets in the package.
Each set includes one transparent plastic knob top and one washer ring. Having two sets gives you a backup right away, so you do not have to worry about finding parts later. It is a smart way to keep your percolator working for a long time.
The knob top is made from sturdy plastic. It is clear, which lets you see the water level and the brewing action inside the pot. This is helpful when you want to know exactly how your coffee is doing without lifting the lid.
Installation is straight forward. You just take off the old knob top, remove any old washer, and put the new one in its place. No tools are needed, and it takes only a minute or two.
The included washer rings are important. They help creat a tight seal between the knob top and the lid. This stops steam from leaking out, so your percolator works more efficently. A good seal means the water heats up properly and brews your coffee the way it should.
Univen Plastic Knob Top and Washer Ring Compatible with Farberware Yosemite Coffee Percolators
The Univen Plastic Knob Top and Washer Ring Compatible with Farberware Yosemite Coffee Percolators is a replacement part designed for a specific set of stovetop percolators. This is not a universal part. It only works with Yosemite stovetop percolators that have a 0.86-inch (22mm) hole in the lid. If your percolator does not have that exact hole size, this part will not fit.
This knob and washer set fits 8-cup and 12-cup Farberware stove top percolators.
It also fits model numbers 50124 and 47053. You should check your percolator’s model number before ordering. The knob itself is 1.5 inches (38mm) tall with a shaft diameter of 0.85 inches (21.5mm). These measurements are important to confirm compatibility with your existing lid.
There are some clear limits to be aware of. This part does not fit electric percolators. It also does not fit percolators manufactured before 1997.
If your percolator is older than that, you will need to look for a different replacement part. The knob is made of plastic and includes the washer ring, so you get everything you need for a single replacement.
When you install it, make sure the shaft slides smoothly into the lid hole. The washer ring helps secure the knob in place. If the fit feels too tight or too loose, double check your lid hole size.
Kscjdg Percolator Coffee Maker Pump Tube Fits Farber-ware 4 Cup Electric Percolators Parts FCP240-04, P13-1354, 3043 Replacement FCP240, 134 Farber-ware Electric Coffee Percolator
The Kscjdg Percolator Coffee Maker Pump Tube is a replacement part made for Farber-ware 4 cup electric percolators. It fits models like the FCP240 and 134, and it replaces original part numbers FCP240-04, P13-1354, and 3043. This tube is the component that controls water pressure and flow inside your percolator, so it plays a key role in how your coffee gets brewed.
If your old tube is worn out or clogged, this part can help restore proper function.
The pump tube measures 5.7 inches in length, which is the standard size for Farber-ware 4-cup percolators. It is designed to match the exact specs of the original part, so it should fit your machine without any extra adjustments. When installed correctly, it helps maintain steady water pressure and flow.
This is important because it allows the brewing process to happen smoothly, which can lead to a more consistent cup of coffee.
This part is made from high-quality material that can handle the heat and pressure that builds up during brewing. It is built to last through repeated use, so you should not have to replace it often. The design is straightforward and focused on doing one job well: moving water up through the coffee grounds. There is nothing fancy about it, but that is the point.
Percolator Pump Tube Springs for Farberware Yosemite Coffee Maker, 2-Pack, Replacement Parts
The Farberware Yosemite coffee maker pump tube springs, 2-pack replacement parts are a straightforward fix for a common issue. If your percolator has been acting sluggish or not brewing coffee with the same vigor it once had, the problem might be right here. These small springs handle a big job inside your coffee maker.
This set is specifically designed as replacement pump tube springs for Farberware Yosemite stovetop percolators.
They are made to ensure a proper fit and correct function. You won’t have to worry about jamming something in that doesn’t belong. The package contains two pieces of quality stainless steel, so you have a spare on hand or can replace both if needed. Having an extra spring ready is just smart planning for future brewing sessions.
The essential function of these springs is to maintain proper tension inside the pump tube.
This tension is what drives the percolation action that makes your coffee. Without it, the water won’t cycle through the grounds correctly, and you end up with weak or uneven coffee. By installing these springs, you restore the consistent brewing performance your percolator was designed for. It keeps the water moving at the right pace for a full, rich pot of coffee every time.
Durable construction matters here.
Univen Percolator Coffee Maker Pump Tube fits Farberware 8 Cup Electric Percolators
The Univen Percolator Coffee Maker Pump Tube is a replacement part that fits Farberware 8 Cup Electric Percolators. This is the pump tube stem, which is the central component that pushes hot water up through the coffee grounds during the brewing cycle. If your old tube is clogged, cracked, or bent, this part will get your percolator working again.
This tube is specifically designed to fit Farberware 8-cup electric percolators.
It is a direct replacement for Farberware part numbers FCP280-04 and P13-1370. It also fits Farberware percolator models FCP280 and 138. You should check your model number before ordering to make sure it matches. The pump tube measures 7.5 inches, or 19 centimeters, in total length. That is the full length from the bottom of the tube to the top where it connects to the basket.
Using this part is straightforward.
You simply remove the old pump tube from the center post of your percolator and slide this one into place. Make sure it sits flush against the bottom of the pot. The tube is made from standard materials that can handle the heat of brewing. It is a simple, no-fuss replacement part that does one thing and does it well.
If your percolator is not brewing properly, the pump tube is often the issue. A damaged tube can cause weak coffee or no brewing at all.
BKIFU P04-303 Coffee Percolators Thermostat Replacement Parts Fits for Farberware Coffee Percolators, Replacement FCP Series Part Number: FCP240 FCP280 FCP412 P04-303
The BKIFU P04-303 Coffee Percolators Thermostat Replacement Part is a direct fit for Farberware coffee percolators in the FCP series, specifically models FCP240, FCP280, and FCP412. If your coffee maker is not heating properly or is turning off too early, this part is likely what you need to fix it. It replaces the original Farberware part number P04-303, so you can restore your brewer to its normal working condition.
This thermostat is designed to solve temperature issues.
It activates at 194°F, with a small margin of error of plus or minus 5 degrees. Once the water is hot enough, it resets at 167°F, plus or minus 8 degrees. This precise control helps your percolator maintain the right heat for consistent brewing. Without it, your coffee might end up too weak or too bitter, so this is a pretty important piece for getting good results every time.
The construction is heavy-duty and made from materials that can handle high temperatures.
That means it can stand up to daily use without wearing down quickly. It is built to be a reliable coffee pot replacement part, and it should help extend the life of your appliance. You won’t have to worry about it failing after a few months of regular brewing.
Installation is strightforward and tool-free. You just need to remove your old thermostat and put this one in its place. No special skills are required, so you can get your machine back up and running in no time.
Univen Coffee Percolator Basket Compatible with Farberware 8 Cup models FCP280 and 138
The Univen P13-1843 Percolator Basket is designed as a direct replacement part for your Farberware 8-Cup electric coffee percolator. It is specifically made to fit models FCP280 and 138. If your current basket is worn out, stained, or not brewing properly, this part can get your machine working like new again.
This basket is the 8-Cup size. That means it holds enough coffee grounds to brew a full pot of eight cups.
It works with the standard basket style found in those specific Farberware models. You simply place your coffee grounds inside, set the basket into the percolator, and let the machine do its work. The design allows water to cycle through the grounds properly, giving you a consistent brew each time.
Compatibility is important here. This basket only fits Farberware 8-Cup electric percolators that are model FCP280 or model 138. It is not a universal part.
Before purchasing, you should check the bottom or back of your percolator for the model number. If it matches one of these two, then this basket will fit correctly. It will snap or sit into place just like the original part did.
The construction is solid. Univen is known for making reliable replacement parts for kitchen appliances. This basket is made from metal, so it can handle the heat of percolation without warping or breaking down quickly. It is also easy to clean.
Farberware Coffee Percolator Parts Buying Guide
Get Farberware coffee percolator parts to restore your classic brewer to full performance. That old percolator might be sitting in your cabinet becuase teh handle is loose or the basket is bent. Don’t toss it. Replacement parts are easy to find and install. You don’t need to be a handyman. Most parts snap or screw right in. The result is a coffee maker that brews just like the day you bought it. Better yet, you save money and keep a quality machine out of the landfill. Let’s look at what you need.
Percolator Baskets and Stem Assemblies
The basket holds your coffee grounds. The stem sends water up and over them. If your coffee tastes weak or watery, check these parts. A bent stem or a rusty basket ruins the brew cycle. Replacement baskets usually come with a new stem and spreader. Make sure you match the size to your model. FBA_8-cup and 12-cup sets are common. If the fit feels tight or loose, double-check your model number. A good seal means better coffee.
Replacement Glass Knobs and Lids
That little glass knob on top lets you watch the coffee perk. It also tells you when brewing is done. If yours is cracked or missing, you need a new one. Glass knobs are fragile but cheap to replace. The lid itself can warp over time. A warped lid lets steam escape. That makes your coffee take longer to brew. Look for lids with a snug fit. Glass knobs screw in from underneath. Tighten them gently—overtightening causes cracks.
Heating Elements and Electrical Cords
The heating element is the heart of your percolator. If the coffee won’t heat up, the element might be dead. Older models use a replaceable heating assembly. Newer ones might need a full base replacement. Check the cord too. Frayed cords are a fire hazard. Replacement cords are available for most Farberware models. Unplug the old one and plug in the new. It’s that simple. If you smell burning plastic, stop using the machine right away.
Gaskets and Seals
Rubber gaskets keep water from leaking between parts. Over time, thay dry out and shrink. A leaky gasket makes a mess on your counter. It also affects water pressure inside the percolator. Replace any gasket that looks cracked or feels brittle. Most gasket kits include the pump tube gasket and the lid seal. They are cheap and take two minutes to install. Your percolator will thank you with better tasting coffee.
Frequently Asked Questions About Farberware Coffee Percolator Parts
What are teh most common Farberware percolator parts that need replacing?
The most common parts are the glass knob on top, the internal basket, and the pump stem. Over time, the rubber gasket around the lid can also wear out. These parts are usually easy to find and swap out yourself.
How do I know which parts fit my specific Farberware model?
Check the bottom of your percolator for a model number. It’s often stamped on the metal. Then look for parts that list that exact number. Most Farberware percolators use standard sizes, but double-checking the model is the safest bet. You can also measure the diameter of your basket and stem.
Can I use replacement parts from other brands?
It’s best to stick with Farberware-branded parts or ones made specifically for your model. Generic parts might fit loosely, which can affect brewing. A bad seal can lead to weak coffee or a mess on your counter. So go with parts designed for your percolator.
Why does my percolator’s glass top keep breaking?
The glass knob can crack from sudden temperature changes. Don’t pour cold water into a hot percolator. Also, avoid over-tightening the knob when you put it back on. A small crack may not leak at first, but it can get worse. Replace it as soon as you see a crack.
How often should I replace the rubber gasket?
Inspect the gasket every few months. If it feels hard, brittle, or has cracks, replace it. A good gasket ensures the lid stays sealed during brewing. You might notice steam escaping if it’s worn out. Replacing it is cheap and quick.
Where is the best place to buy Farberware percolator parts?
Online marketplaces like Amazon and eBay have lots of options. You can also check specialty kitchen supply stores. Some hardware stores carry basic parts too. Just make sure the seller has good reviews. That way you get quality parts that last.
My coffee isn’t hot enough. Is it a part problem?
It could be. A worn out pump stem might not circulate the water properly. Also check the basket for clogs. If the holes are blocked, the water won’t flow right. Try cleaning all parts first. If that doesn’t help, replace the stem or basket.
Can I use a replacement basket from a different percolator?
Probably not. Baskets come in different sizes and shapes. A basket thats too small can let grounds slip through. One that’s too big won’t fit. Stick with Farberware-compatible baskets to keep your coffee tasting good.
Our Final Recommendation
Your Farberware percolator is built to last, but even teh best gear needs a little care now and then. Keeping it running smooth means replacing worn parts when needed. It’s a simple fix that saves you money and keeps your coffee tasting great. You know your percolator best, so check for any cracks or loose fits. A quick swap can make it feel like new again.
Don’t settle for less when you can keep your brewer going strong. Genuine parts from Farberware ensure a perfect fit and safe operation. Grab what you need from our selection of farberware coffee percolator parts and get back to brewing your favorite morning cup. Your coffee maker will thank you for years of reliable service.